 | Learn and follow all safety regulations and procedures |
|
| Must be skilled and knowledgeable regarding industrial steel preparation and coatings |
|
| Cleans surface of work piece in preparation for coating, using solvent, wire wheel, scraper, or blasting |
|
| Selects and mixes ingredients to prepare coating substance according to specifications, using paddle or mechanical mixer |
|
| Turns dial, handwheel, valve or switch to control and adjust temperature, speed, and flow of product or machine |
|
| Fills paint pot, reservoir, trough, or pan with material used to coat, paint, or spray, using airless or conventional spray gun |
|
| Measures and mixes specified quantities of substances to create coatings, paints, or sprays |
|
| Transfers completed item or product from paint area, drying or storage area, using crane or forklift |
|
| Cleans and maintains tools, equipment and work area, using solvent, water, brushes, and cleaning aids |
|
| Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers |
|
| Perform test runs to ensure that equipment is set up properly |
|
| Cover surfaces with drop cloths or masking tape and paper to protect surfaces during painting |
|
| Apply primers or sealers to prepare new surfaces, such as bare metal, for finish coats |
|
| Confer with supervisory personnel or management, to discuss and resolve matters such as work procedures, quality issues, and painting problems |
|
| Inspect and review fabrication to monitor compliance with safety policies, contract specs, and fabrication standards |
|
| Inspects materials, products, and equipment to proactively detect defects and malfunctions and report to supervisor and maintenance |
|
| Monitors and patrols work area to ensure continuous improvement through 5S, total productive maintenance, lean activities and enforce all safety regulations and policies |
|
| Work closely with supervisor, leadman and employees to minimize handling, re-work, and defects |
|
| Must be dependable, responsible and fulfill obligations |
|
| Must have ability to paint 1-3 coat paint systems as required |
|
| Must have ability to read prints for masking |
